favorite
favorite
hide
unhide
flag

Posted

print

Controls Electrical Enclosure 24" x 22" x 13" Deep - Used - $60 (Roswell)

Controls Electrical Enclosure 24" x 22" x 13" Deep - Used 1 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 2 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 3 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 4 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 5 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 6 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 7 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 8 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 9 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 10 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 11 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 12 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 13 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 14 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 15 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 16 thumbnailControls Electrical Enclosure 24" x 22" x 13" Deep - Used 17 thumbnail
condition: fair
make / manufacturer: UniFab Enclosures
model name / number: none
size / dimensions: 33x22x13
Steel Enclosure 24" Wide x 22" Tall x 13" Deep.

Automation Enclosure. Control Enclosure. Controller. Project Box.

Overall width with the Black side handles is approx 33". (observed in Pictures).

Front cutout measurement: 15 3/16" tall x 11 3/16" wide. 2.5" below the top edge.

Unit includes 5 buttons\switches as observed. All functioning properly.
The switch labeled "NO MODE" has a working key and this works as expected.

Mounted on the Side: (as observed in Pictures)
"Program terminal" is an RJ45 network connector for a pass thru connection.
"Duplex" outlet is a single 120VAC outlet with 3A circuit breaker.

Rear Door with 2 latches has a back panel for mounting hardware:
Internal parts included are 2x DIN rail pieces, Plastic Cable guides (with some of the covers).
3x Circuit Breakers "Allen-Bradley" 1492-SP type, 2A, 5A and 5A respectively.
Yellow and blue wire terminal blocks (as observed in picture).

Unit is used. Scratches\scrapes found on paint\metal surfaces as observed in pictures.

Unit is heavy, approx 70-ish lbs.

I can deliver within 30miles of 30075 for $30.00.

post id: 7758866598

posted:

best of [?]

loading
reading
writing
saving
searching