loading
reading
writing
saving
searching
Event Electronics 20/20p Powered studio monitors speakers - $150
QR Code Link to This Post
Includes the power cables and connection cables.
These were connected to a keyboard but never really used much. In a smoke-free home.
From the manual is below a description of the specs:
These feature a one-inch silk dome, high-frequency driver specially designed to be superbly accurate yet non-fatiguing to your ears and an 8" mineral-impregnated, polypropylene cone, low-frequency driver that delivers fat, punchy, un-hyped bass. Active asymmetrical fourth-order crossover with incredibly accurate phase response for phenomenal stereo imaging.
I/O includes balanced XLR and 1/4" inputs. The V2 Passive Monitor units also feature continuously variable input gain control, full protection circuitry, and magnetic shielding.
KEY FEATURES
LF driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
HF driver: magnetically shielded, one inch ferrofluid-cooled silk dome
Frequency response: 38Hz-20kHz, ±3dB (-2dB @ 38Hz), ref. 500Hz
Crossover: 2.6kHz, active fourth order
150W program, 200W peak power handling per side
Inputs: Balanced; combination XLR - 1/4"; accepts balanced or unbalanced sources
Input sensitivity: 1.1V input produces full output with input level control at maximum
LF trim: Continuously variable control; max boost/cut settings produce ±3dB @ 100Hz, ±2dB @ 400Hz
HF trim: Continuously variable control; max boost/cut settings produces ±3dB above 2.6kHz
Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, resettable mains circuit breaker
Cabinet: 5/8" vinyl-laminated MDF
Dimensions: 10-1/4"W x 14-3/4"H x 11-3/4"D
SPECIFICATIONS
20/20BAS V2 Passive Monitor System
LF Driver: magnetically shielded 8" mineral-filled polypropylene cone with 1-1/2" diameter high-temperature voice coil and damped rubber surround
HF Driver: magnetically shielded 25mm ferrofluid-cooled silk dome
Crossover: 2.2kHz, second order
Frequency Response: 50Hz - 20kHz, ±3dB, Ref. 500Hz
Power Handling: 150W program, 200W peak per side
Sensitivity: 88dB @ 1W, 1m Cabinet: 5/8" vinyl-laminated MDF Connectors: Red and black five-way binding posts on 3/4" centers
Dimensions: 10-1/4" W x 14-3/4" H x 11-3/4" D
Weight: 22 lbs each